Set up an ICT workstation: Installing and setting up a Windows 10 client

Setting up and testing the client

All steps contain links in the form of guides and videos that explain how to implement this step. During this task you will never need more than 1 VM 8 GB RAM should be sufficient. The official user manual can be obtained directly from https://www.virtualbox.org/wiki/Documentation can be obtained directly from

Documentation

In order to document the work performed, you create a documentation for the entire task a single document with a concise summary of the step, a description of the work process, the tests performed and a brief reflection based on this template:

Documentation template

In this document you document all tests that you carry out. If the tests turn out badly, leave the test results in the documentation and carry out new tests after making the necessary adjustments, which you then also enter in the documentation. Upload the completed documentation to your Wekan order.

Step 1: Install and set up VirtualBox

A NAT network with the name NATnet is to be configured in VirtualBox for the virtual machine. The network CIDR should be: 10.0.2.0/24 (normally the NAT network already has this value)

Information about

Siehe VM Operating Instructions Chapter 6.2, 6.4

Step 2: Basic installation of the client

In step 2, you set up a Windows 10 Enterprise client that you will use to test the services that you will install in the course of this training task.

Step 2a: Installing a Windows 10 Enterprise client

Install a Windows 10 Enterprise client within your virtual environment - i.e. in your NAT network - with the following specifications:

Client Base Settings

Virtual HW: 2GB RAM
Partition: 30GB
OS: Windows 10 Enterprise
IP address: DHCP (still DHCP of the NAT network)
Hostname: PC-ZH-01

Host information

Windows 10 Enterprise ISO Download

(Optional) Step 2b: Create an image Windows 10 Enterprise Client

It is helpful to use several PCs for testing. It is therefore also advisable to create a template from the PC. Export an image of the Windows 10 client in the same way as step 2b. With the difference that you do not have to prepare the PC with sysprep.

Step 3: Installing the standard software

Finally, the software should be installed according to company standards. Select the appropriate type from the following list and install the required software. Please also note that you may have to uninstall unwanted software in order to fulfil the requirements.

Step 4: Testing

Please test the entire solution. To do this, use the test protocols that you will find in the documentation template. At least fulfil the following requirements:

• The virtual HW of the created VM corresponds to the given specifications
• The Windows 10 client can connect to the Internet
• The specified software is installed/uninstalled and working